+1 (713) 461-5200
OPEN®

Analyzing Bearings Failures

ITC_BRG-200x200.jpg

Analyzing Bearings Failures

This lesson explains the purpose of bearings and demonstrates how bearings reduce friction and maintain the alignment of operating equipment. The basic operation of antifriction bearings and plain journal bearings is demonstrated as well as the importance of full fluid film lubrication and proper lubrication clearance. Additionally, indications of various premature bearing failures are discussed.

Clear

SKU: ITC.BRG_2BRG Category: Tag:

Course Overview

This course consists of three lessons designed for the training of bearings. Topics covered include the importance of bearings in machinery operation, concept of load and how it affects bearings, and housings. Additionaly, the main types of bearing are discussed: plain, anti-friction, and thrust bearings.

Module Overview

This lesson explains the purpose of bearings and demonstrates how bearings reduce friction and maintain the alignment of operating equipment. The basic operation of antifriction bearings and plain journal bearings is demonstrated as well as the importance of full fluid film lubrication and proper lubrication clearance. Additionally, indications of various premature bearing failures are discussed.

  • Dismount anti-friction bearings using a bearing press and/or a bearing puller
  • Inspect the bearing for signs of failure
  • Clean the shaft and check for taper and out-of-round using the proper measuring instruments
  • Clean the housing and check for damage
  • Select the proper bearing for replacement, if necessary
  • Properly orient a bearing prior to installation
  • Mount a bearing using an induction heater and/or an arbor press
  • Measure the bearing’s inner and outer clearances during installation
  • Properly lubricate bearings per manufacturers’ recommendations
*SkillGRID access for 1 year is included with purchase of all courses/modules for new and expired SkillGRID members.

You may also like…

Adding to cart