+1 (713) 461-5200
OPEN®

Introduction to Petroleum Industry DIT Drilling Focus Certificate Program

IADC_DIT-DRILLING_05-15

Introduction to Petroleum Industry DIT Drilling Focus Certificate Program

Total:a $ 900

Delivered through
SkillGRID
SKU: PTRT1002 Category: Tag:

Included Modules


Introduction to Rig Types and Basic Drill String Components

The first Oilwell Drilling module covers basic oil and gas well drilling principles. Different types of drilling rigs are presented, the difference between a kelly/rotary tabl...
Clear

Basic Blowout Prevention Equipment Components

A blowout represents the single most dangerous threat to human life and property during the drilling process. This module explains the causes of a blow-out and covers the tool...
Clear

Introduction to Drilling Fluids

Volume 3 concerns the function of drilling fluids in drilling operations. The module covers the physical properties of drilling mud, the advantages of mud additives, and the i...
Clear

Mud Circulation and Treating Equipment

Volume 4 presents a comprehensive overview of the mud circulation and conditioning systems on a drilling rig. It follows the flow of mud step-by-step through the system and ex...
Clear

Hoisting Equipment

The purpose and operation of a rig's hoisting system are covered in the fifth Oilwell Drilling module. All important elements are described in detail, from the drawworks to th...
Clear

Rotating Equipment, Mast, and Substructure

Volume 6 addresses both the kelly/rotary table and top drive systems, and discusses the advantages of each in various drilling operations. The module also explains the functio...
Clear

Pipe Handling

This module describes the process of tripping pipe and making connections with kelly and top drive rotary systems. It also explains the use of slips and elevators, describes t...
Clear

Casing and Cementing

Casing and primary cementing operations are covered in the eighth volume of Oilwell Drilling. The module examines the purpose and qualities of basic casing strings and liners,...
Clear

Well Logging, Mud Logging, and Drill Stem Testing

Volume 9 explains the need for careful testing to determine the commercial potential of a well prior to completion. Methods and tools for mud logging, well logging, and drill...
Clear

Power Systems and Instrumentation

The various types of power systems found on the rig are presented in this module: AC to DC, DC to DC, mechanical, hydraulic, and pneumatic drive systems. The module emphasizes...
Clear

Geology of Petroleum

Module 1 discusses how the physical structure of the earth was formed, what the earths crust is composed of, how the history of the earth is mapped, which processes are involv...
Clear

Exploration for Oil and Gas

Module 2 discusses the difference between reserves of oil and gas and petroleum as a resource, how a reservoir is formed, what the characteristics of a viable reservoir are, t...
Clear

Drilling Operations Basics

Module 3 discusses the nature of drilling operations, the importance of subsurface conditions, why well bores change size, the three stages of drilling, why different drilling...
Clear

Production of Oil and Gas

Module 4 discusses the steps involved in preparing a well for production, what natural lift is and the types of natural lift, the principal types of artificial lift, the types...
Clear

Petroleum Refining Process

Module 5 discusses which molecules make up the different types of hydrocarbons, how contaminants in the oil are dealt with, why boiling points are important to the refining pr...
Clear

Transportation, Distribution and Delivery of Oil and Gas

Module 6 discusses why two basic transportation streams are used, how natural gas is transported, distributed and delivered, how crude oil is also transported, distributed and...
Clear

Marketing Petroleum Products

Module 7 discusses what the three marketing sectors of petroleum are, which forces control the nature of the petroleum market, where the major producers and major consumers ar...
Clear

Introduction to Well Control, Module 1: Well Control Equipment

Well Control Equipment: This module covers why controlling pressure in the well is important, the role of drilling fluid in controlling the well, BOP stacks and how they work,...
Clear

Introduction to Well Control, Module 2: Units of Measure

Units of Measure: Module 2 covers units of measurement used in the oil field, calculating surface area and volume, calculating pressure, and the definition of density and how...
Clear

Introduction to Well Control, Module 3: Hydrostatic Pressure

Hydrostatic Pressure: Hydrostatic pressure discusses the linear relationship between depth and pressure, how to calculate it, the importance of true vertical depth(TVD), and h...
Clear

Introduction to Well Control, Module 4: Pressure Balance

Pressure Balance: Topics covered in this module are how the drill string and annulus can be represented as a U-tube, differences between normal, abnormal and subnormal formati...
Clear

Introduction to Well Control, Module 5: Causes of Kicks

Causes of Kicks: In this module, you will learn how to identify the different conditions that can cause a kick, describe how a kick develops, describe the warning signs and th...
Clear

Introduction to Well Control, Module 6: Controlling the Well

Controlling the Well: This module covers the steps involved in shutting in the well when a kick is detected, how closing in the well can be used to increase bottomhole pressur...
Clear

Introduction to Well Control, Module 7: Restoring the Well

Restoring the Well: The final module in the IWC series covers the special problems that kicks from shallow formations present, why maintaining constant bottomhole pressure is...
Clear

Bit Hydraulics

Clear

Introduction to Horizontal Drilling

The first horizontal drilling module covers basic history, technologies, and reasons for drilling horizontal wells. Also covered in this module are topics relating to producti...
Clear

Horizontal Drilling Volume 2

This module continues where the introduction left off, covering build curves, kick-off points, build radii, and curve information. The module continues with drilling processes...
Clear

Basic Concepts of Pressure

This module discusses the various pressures that are important in a course on well control. The module details the origins of these pressures and helps in understanding how th...
Clear

Pressures in a Well

Module 2 demonstrates how to calculate each type of pressure and to understand its significance in well control. The types of pressures covered include formation pressure, sur...
Clear

The Drillers Well Control Method

This module will begin with an overview of the Driller's Method. Next, we'll cover the Driller's Method step-by-step. A specific example of an application of the Driller's Met...
Clear

Wait-and-weight Control Method

This module begins with a general description of the Wait-and-Weight Method. Next, it covers the Drill Pipe Pressure Profile. The module then takes a detailed look at the Wait...
Clear

Kick Detection

Clear

Primary Cementing

Primary Cementing reviews the objectives of cementing an open hole. The student learns the characteristics of an ideal cementable wellbore, and how best to achieve them. The c...
Clear

Underbalanced Drilling

Clear

Course Overview

This course is designed for individuals that are interested in a comprehensive understanding of the upstream operations of the petroleum industry with a focus on drilling.

This program includes an IADC accredited certificate.

Included Modules

  1. Geology of Petroleum: Module 1 discusses how the physical structure of the earth was formed, what the earths crust is composed of, how the history of the earth is mapped, which processes are involved in the formation of mountains, why sedimentation occurs, what organic matter is and how oil and gas are formed.
  2. Exploration for Oil and Gas: Module 2 discusses the difference between reserves of oil and gas and petroleum as a resource, how a reservoir is formed, what the characteristics of a viable reservoir are, the techniques used to identify potential reservoir formations the role seismic surveys play in locating potential reservoirs and why exploratory drilling is only used when the potential for a viable reservoir is high.
  3. Drilling Operations Basics: Module 3 discusses the nature of drilling operations, the importance of subsurface conditions, why well bores change size, the three stages of drilling, why different drilling methods are used and the significance of well bore control.
  4. Production of Oil and Gas: Module 4 discusses the steps involved in preparing a well for production, what natural lift is and the types of natural lift, the principal types of artificial lift, the types of well completions, what is involved in well servicing and how oil and gas are treated on emerging from the well.
  5. Petroleum Refining Process: Module 5 discusses which molecules make up the different types of hydrocarbons, how contaminants in the oil are dealt with, why boiling points are important to the refining process, where refineries are located, what the two basic areas of a refinery are, what happens during the two main stages of refining, why each upgrading procedure is important and what happens before and after the refining process.
  6. Transportation, Distribution and Delivery of Oil and Gas: Module 6 discusses why two basic transportation streams are used, how natural gas is transported, distributed and delivered, how crude oil is also transported, distributed and delivered, where refineries are located, how bulk and finished refined products reach their consumers and how using oil and gas affects the environment as well as the industry.
  7. Marketing Petroleum Products: Module 7 discusses what the three marketing sectors of petroleum are, which forces control the nature of the petroleum market, where the major producers and major consumers are located, how crude oil is traded, how the supply and demand of petroleum is stabilized and how refined petroleum products are marketed.
  8. Introduction to Rig Types and Basic Drill String Components: The first Oilwell Drilling module covers basic oil and gas well drilling principles. Different types of drilling rigs are presented, the difference between a kelly/rotary table and a top drive system is explained, and the components of a drill string are described in detail.
  9. Basic Blowout Prevention Equipment Components: A blowout represents the single most dangerous threat to human life and property during the drilling process. This module explains the causes of a blow-out and covers the tools and methods used to control and prevent drilling kicks.
  10. Introduction to Drilling Fluids: Volume 3 concerns the function of drilling fluids in drilling operations. The module covers the physical properties of drilling mud, the advantages of mud additives, and the importance of mud testing. Procedures for drilling with air and foam are also discussed.
  11. Mud Circulation and Treating Equipment: Volume 4 presents a comprehensive overview of the mud circulation and conditioning systems on a drilling rig. It follows the flow of mud step-by-step through the system and explains the function of all circulation components.
  12. Hoisting Equipment: The purpose and operation of a rig’s hoisting system are covered in the fifth Oilwell Drilling module. All important elements are described in detail, from the drawworks to the traveling block.
  13. Rotating Equipment, Mast, and Substructure: Volume 6 addresses both the kelly/rotary table and top drive systems, and discusses the advantages of each in various drilling operations. The module also explains the function and characteristics of masts and derricks, and the components of the substructure.
  14. Pipe Handling: This module describes the process of tripping pipe and making connections with kelly and top drive rotary systems. It also explains the use of slips and elevators, describes the features of a driller’s console, and introduces innovations such as the iron roughneck.
  15. Casing and Cementing: Casing and primary cementing operations are covered in the eighth volume of Oilwell Drilling. The module examines the purpose and qualities of basic casing strings and liners, describes casing accessories, and explains the cementing procedure from start to finish.
  16. Well Logging, Mud Logging, and Drill Stem Testing: Volume 9 explains the need for careful testing to determine the commercial potential of a well prior to completion. Methods and tools for mud logging, well logging, and drill stem testing are described in detail.
  17. Power Systems and Instrumentation: The various types of power systems found on the rig are presented in this module: AC to DC, DC to DC, mechanical, hydraulic, and pneumatic drive systems. The module emphasizes the importance of prime movers, and concludes with a review of rig instrumentation.
  18. Primary Cementing: Primary Cementing reviews the objectives of cementing an open hole. The student learns the characteristics of an ideal cementable wellbore, and how best to achieve them. The course then describes the procedures used to condition the mud prior to cementing the wellbore, including specific additives for different configurations. Furthermore, it explains the key to attaining complete mud displacement during the cementing job, and how this positively influences the success of the completion.
  19. Kick Detection: Kick Detection trains the student to detect drilling kicks as early as possible. This course illustrates the significance of formation porosity and permeability in the development of a drilling kick. It also shows the role of the mud column in holding back the kick. Several early warning signs are explained and demonstrated through animated graphics: mud returns cut with oil, water or gas; drilling break; pit gain; change in rate of mud return; decrease in mud pump discharge pressure; increase in drill string weight; and unaccounted-for fluid gain or loss while tripping. The lesson concludes with the proper actions that must be taken to assure early kick detection. These include noting changes made to pit volumes, maintaining trip sheets, using the trip tank, investigating any sign of a possible kick, responding to alarms, and proper maintenance of PVT equipment.
  20. Well Control Equipment: This module covers why controlling pressure in the well is important, the role of drilling fluid in controlling the well, BOP stacks and how they work, and the function of other equipment used in well control activities. Instrumentation used in well control operations is also discussed.
  21. Units of Measure: Module 2 covers units of measurement used in the oil field, calculating surface area and volume, calculating pressure, and the definition of density and how it is measured.
  22. Hydrostatic Pressure: Hydrostatic pressure discusses the linear relationship between depth and pressure, how to calculate it, the importance of true vertical depth(TVD), and how the hydrostatic pressures in different sections of a well add to determine bottom hole pressure.
  23. Pressure Balance: Topics covered in this module are how the drill string and annulus can be represented as a U-tube, differences between normal, abnormal and subnormal formation pressures, and balancing formation pressures with hydrostatic pressure of the drilling fluid.
  24. Causes of Kicks: In this module, you will learn how to identify the different conditions that can cause a kick, describe how a kick develops, describe the warning signs and the indicators of kicks, and describe the effects of a gas kick.
  25. Controlling the Well: This module covers the steps involved in shutting in the well when a kick is detected, how closing in the well can be used to increase bottomhole pressure and stop flow, why responding quickly to a kick is important, and how migrating gas in a shut-in well effects surface and downhole pressures.
  26. Restoring the Well: The final module in the IWC series covers the special problems that kicks from shallow formations present, why maintaining constant bottomhole pressure is important when handling a kick, and the steps in two methods used to restore normal circulation.
  27. Underbalanced Drilling 1: The first volume on Underbalanced Drilling (UBD) and Completions provides the student with an overview of the specialized technology and operations used in this critical oilfield discipline. The reasons why UBD techniques are employed are presented in a straightforward manner along with a discussion of advantages and concerns. The student will become familiar with the mechanical equipment used in UBD operations as well as the different types of UBD and their specific field application.
  28. Introduction to Horizontal Drilling: The first horizontal drilling module covers basic history, technologies, and reasons for drilling horizontal wells. Also covered in this module are topics relating to production rate, economics of horizontal drilling, types of horizontal wells, completion options, equipment, and the steps leading up to production.
  29. Horizontal Drilling Volume 2: This module continues where the introduction left off, covering build curves, kick-off points, build radii, and curve information. The module continues with drilling processes and examples specifically related to horizontal drilling.
  30. Bit Hydraulics: Bit Hydraulics explains the interaction of hydraulics with other drilling and mud parameters, for an understanding of overall drilling efficiency. This course include complete references of graphs, tables, equations, and rules for hydraulic calculations. Example problems walk the student through total hydraulic design, from liner size selection to actual jet sizing. An interactive “what if?” exercise permits the student to observe the effects of individual properties on bit hydraulic horsepower. Although aimed primarily at tri-cone bit hydraulics, a section on PDC and diamond bits is also included.
  31. Basic Concepts of Pressure: This module discusses the various pressures that are important in a course on well control. The module details the origins of these pressures and helps in understanding how these different pressures affect and interact with one another. This module also instructs how to calculate and interpret pressure data.
  32. Pressures in a Well: Module 2 demonstrates how to calculate each type of pressure and to understand its significance in well control. The types of pressures covered include formation pressure, surface pressure, bottomhole pressure, trapped pressure, drill pipe pressure, fracture/ leak-off pressure, and surge and swab pressure.
  33. The Drillers Well Control Method: This module will begin with an overview of the Driller’s Method. Next, we’ll cover the Driller’s Method step-by-step. A specific example of an application of the Driller’s Method will be presented. Next, you will learn the two Driller’s Method rules, and the Driller’s Method Worksheet will be introduced. The module concludes by discussing calculations involving shut-in drill pipe pressure (SIDPP) and shut-in casing pressure (SICP), and an explanation of maximum shoe pressure.
  34. Wait-and-weight Control Method: This module begins with a general description of the Wait-and-Weight Method. Next, it covers the Drill Pipe Pressure Profile. The module then takes a detailed look at the Waitand- Weight Method and discusses the Wait-and-Weight Method worksheet. The module concludes by comparing the advantages and disadvantages of the Driller’s Method and the Wait-and-Weight Method.
*SkillGRID access for 1 year is included with purchase of all courses/modules for new and expired SkillGRID members.
Adding to cart